BS EN 13210-1:2020 pdf free download – Child care articles Part 1: Children’s harnesses, reins一Safety requirements and test methods.
7.1.7 Leading rein
The maximum length of the leading rein between the inside of the waist belt and the end of the leading rein, including the carer’s attachment adjusted to its most onerous position shall be 1 200 mm.
7.1.8 Wrist type walking rein
The maximum length of the wrist type walking rein, including wrist loops adjusted to their most onerous positions shall be 1 200 mm when a force of 200 N is applied.
The child’s wrist ioop shall have a circumference capable of adjustment to a minimum of 100 mm and of minimum width of 19 mm.
The carer’s hand/wrist loop shall have a minimum width of 19 mm and shall comply with one of the following:
— a non-adjustable loop with a minimum circumference of 300 mm when a force of 30 N is applied; or
— an adjustable loop with a facility for quick release in an emergency.
7.1.9 Attachment straps
If attachment straps are provided with the harness for use with other child use articles they shall be attached or be capable of being attached to both sides of the waist belt or fabric type assembly.
The attachment straps shall be adjustable.
The distance between the waist belt and the point of attachment on the child care article shall be capable of adjustment to 140 mm when attached according to the manufacturer’s instructions.
7.2 Structural integrity
7.2.1 Requirements
After testing in accordance with 7.2.2 the harness with training rein, its components, stitching or rivets shall not be broken or damaged and shall continue to function as intended. The maximum slippage of each adjustment mechanism shall be 20 mm.
After testing in accordance with 7.2.3 the harness with training rein and training rein extender, its components, stitching or rivets shall not be broken or damaged and shall continue to function as intended. The maximum slippage of each adjustment mechanism shall be 20 mm.
After testing in accordance with 7.2.4 the harness with leading rein, its components, stitching or rivets shall not be broken or damaged and shall continue to function as intended. The maximum slippage of each adjustment mechanism shall be 20mm.
A harness supplied with a leading rein that can also be used as a training rein shall only be tested in accordance with 7.2.2.
After testing in accordance with 7.2.5 the harness with attachment straps, its components, stitching or rivets shall not be broken or damaged and shall continue to function as intended. The maximum slippage of each adjustment mechanism shall be 20 mm.
After testing in accordance with 7.2.6 the wrist rein, its components, stitching or rivets shall not be broken or damaged and shall continue to function as intended. The maximum slippage of each adjustment mechanism shall be 20 mm.
7.2.2 Test method for harness with training rein
7.2.2.1 Fit a conditioned but untested harness to the test dummy so that the waist belt is horizontal and in contact with test dummy around its circumference without constricting the test dummy.
7.2.2.2 Adjust the training rein connectors on the waist belt to the furthest distance apart on the back of the waist belt.