UL-60335-2-67:2017 pdf free download – STANDARD FOR SAFETY Household and Similar Electrical Appliances – Safety – Part 2-67: Particular requirements for floor treatment machines, for commercial use.
Machines shall be marked with the mass of the most usual configuration in kg.
Machines intended to be used indoors and powered by internal combustion engines shall be marked with the symbol according to Figure 106. It is acceptable to show this symbol in monochrome colour.
7.1 DV D2 Modification of Clause 7.1 of the Part 2 by adding the following dashed item to the list:
— if a manufacturer produces or assembles floor-finishing machines at more than one factory, each finished product shall have a distinctive marking, which may be in code, by means of which it can be identified as the product of a particular factory.
7.1.101 MOTORIZED CLEANING HEADS shall be marked with
— RATED VOLTAGE or RATED VOLTAGE RANGE in volts;
— RATED POWER INPUT in watts;
— name, trade mark or identification mark of the manufacturer or responsible vendor;
— model or type reference;
— mass of the most usual configuration in kg.
MOTORIZED CLEANING HEADS for water-suction cleaning appliances, except those of CLASS III CONSTRUCTION having a WORKING VOLTAGE up to 24 V shall be marked with symbol lEG 6041 7-5935 (2002-10).
NOTE This symbol is an information sign and, except for the colours, the rules of ISO 3864-1 apply.
Compliance is checked by inspection.
7.1.102 Socket-outlets for accessories shall be marked with the maximum load in watts on the socket-outlet or nearby.
Compliance is checked by inspection.
7.1.1 O2DV D2 Modify the text in Clause 7.1 of the Part 1: Replace the first sentence with the following:
Socket-outlets for accessories shall be marked with the maximum load in watts or current in amps on the socket-outlet or nearby.
7.1.1 O3DV D2 Add Clause 7.1. 1O3DV to Clause 7.1 of the Part 2:
BATTERIES and BA1-rERY ASSEMBLIES shall be legibly and permanently marked with the following:
a) The manufacturer’s name, trade name, or trademark. The manufacturer’s identification may be in a traceable code when the BATTERY is identified by the brand or trademark owned by a private labeler.
b) Catalog designation or equivalent identification
The instructions shall contain at least the following:
— the business name and full address of the manufacturer and, if applicable, his authorized representative.
— designation of series or type of the machine as marked on the machine itself, except for the serial
number;
NOTE 101 The designation of series or type can be abstracted, as long as the identification of the product must be ensured.
— the general description of the machine;
— the intended use of the machine and the auxiliary equipment as covered by the scope of this standard;
NOTE 102 Examples of auxiliary equipment are spray units, suction units, and lights.
— the meaning of the symbols used on the machine and in the instructions;
— drawings, diagrams, descriptions and explanations necessary for the safe use, maintenance and repair of the machine and for checking its correct functioning;
— technical data including the markings on the machine;
— information regarding putting into service, safe operation, handling, transportation, and storage of the
machine taking into account its weight;
— instructions to enable adjustment and maintenance to be carried out safely, including the protective
measures that should be taken during these operations;
— the conditions in which the machine meets the requirement of stability during use, transportation, assembly, dismantling when out of service, testing or foreseeable breakdowns.