ISO TR 8713:2019 pdf free download – Electrically propelled road vehicles一 Vocabulary.
3.100
mode 4
connection of the EV to the a.c. or d.c. supply network (mains) utilizing a d.c. EV supply equipment or d.c. EV charging station using a control pilot function
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 17409:20 15.
3.101
non-externally chargeable HEV
HEV with a rechargeable energy storage system (RESS) that is not intended to be charged from an external electric energy source
Note ito entry: Master publication in ISO/TC 22/SC 37: ISO 23274-1:2013, also defined in ISO 23274-2:2012.
3.102
non-isolated d.c. EV charging station
d.c. EV charging station with d.c. circuit on output side which is not electrically separated by at least basic isolation from the supply system
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 17409:2015.
3.103
optimal alignment
alignment with the most efficient power transfer
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:2017.
3.104
overcurrent protection
protection intended to operate when the current is in excess of a predetermined value
[SOURCE: IEC 60050-195:1998, 448-14-26]
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:20 18.
3.105
overload protection
protection intended to operate in the event of overload on the protected section
[SOURCE: IEC 60050-195:1998, 448-14-31]
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:2018.
3.106
pairing
process by which an EV is correlated with the unique dedicated primary device at which it is located and from which power will be transferred
Note I to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:2017.
3.107
plug
accessory having contacts designed to engage with the contacts of a socket-outlet, also incorporating means for the electrical connection and mechanical retention of flexible cables or cords
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 17409:2015.
3.108
potential equalisation
electric connections of exposed conductive parts of the electric equipment to minimize differences in potential between these parts
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-4:2015.
Note 2 to entry: Master publication in ISO/TC 22/SC 37: ISO 17409:20 15.
3.137
state of charge
SOC
available capacity of a RESS or RESS subsystem expressed as a percentage of rated capacity
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469.1:_26), also defined in ISO 12405-4:2018
(“RESS or RESS subsystem” is replaced by “battery pack or system”), ISO 23274-1:20 13, ISO 23274-2:20 12 and
ISO 23828:20 13.
3.138
steady state
state of a system at which all state and output variables remain constant in time while all input variables are constant
[SOURCE: IEC 60050-351]
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:2017.
3.139
supplementary insulation
independent insulation applied in addition to basic insulation, for fault protection
[SOURCE: IEC 60050-195:1998, 195-06-07]
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469-3:2018, also defined in ISO 17409:2015 and ISO/PAS 19363:2017.
3.140
supplier
party that provides voltage class B component or system
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19295:2016.
party that provides RESS or RESS subsystems
EXAMPLE A RESS manufacturer
Note 2 to entry: Master publication in ISO/TC 22/SC 37: ISO 6469.1:_27).
3.141
supply device
off-board component assembly comprising the primary device, the supply power electronics and the supply device communication controller as well as the mechanical connections between the components necessary for wireless power transfer
Note 1 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:20 17.
3.142
supply equipment communication controller
SECC
entity which implements the communication to one or multiple EVCCs
Note 1 to entry: Functions of a SECC control input and output channels, data encryption, or data transfer between vehicle and SECC.
[SOURCE: ISO 15118-1]
Note 2 to entry: Master publication in ISO/TC 22/SC 37: ISO/PAS 19363:2017.