Standards World

ASTM D882:18 pdf free download - Standard Test Method for Tensile Properties of Thin Plastic Sheeting. 6.1.4 Drive Mechanism—A drive machanism for imparting to the movable mcmbcr a uniform, controlled velocity with respect to thc stationary. The...

ASTM D850:2021 pdf free download - Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials. 6.3.1.1 The manual distillation condenser and cooling bath shall be as specified in Section 5, and Fig. I of...

ASTM D792:20 pdf free download - Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics bv Displacement. 11. Test Specimen 11.1 The test specimen shall be a single piece of material with a size...

ASTM D790:17 pdf free download - Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials. 5.1 .K.3 Chant Modulus E1—The chord modulus is calculated from two discrete points on the load...

ASTM D750:12(R2021) pdf free download - Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus. 6.7.6 The chamber air temperature shall be set at 44°C in equipment that provides for adjustment of the chamber air temperature. 6.8...

ASTM D698:12(R2021) pdf free download - Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 f-lb_/ft3 (600 kN-m/m3)). 5.3.1 Oversize Fraction—Soils containing more than 30 % oversize fraction (material retained on the ¾-in....

ASTM D610:08(2019) pdf free download - Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces. 5.4 Do not consider flow of corrosion products onto the surface of intact coaling that is. “rust bleed” or staining)...

ASTM D610:07 pdf free download - Standard Test Method for Evaluating Degree of Rusting on Painted Steel Surfaces. 3.2 The degree at rusting is evaluated using a zero to ten scale based on the percentage of visible...

ASTM D543:20 pdf free download - Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents. 5.8 Lahoratoiy Hood or other system adequate for vapor ventilation. 6. Reagents and Materials 6.1 The following list of standard...

ASTM D523:14 pdf free download - Standard Test Method for Specular Gloss. leave a film.) Rinse standards in hot running water (temperature near 150°F (65°C)) to remove detergent solution, followed by a final rinse Do 1101 wipe...