BS EN 00934-4:2009 pdf free download – Admixtures for concrete, mortar and grout Part 4: Admixtures for grout for prestressing tendons一Definitions, requirements, conformity, marking and labelling.
ZA.2.2 EC certification and declaration of conformity
When compliance with the conditions of this annex is achieved, and once the notified body has drawn up the certificate mentioned below, the manufacturer or his agent established in the EEA shall draw up and retain a declaration of conformity, which entitles the manufacturer to affix the CE marking. This declaration shall include:
— name and address of the manufacturer, or his authorised representative established in the EEA, and place of production,
NOTE 1 The manufacturer may also be the person responsible for placing the product onto the EEA market, if he takes responsibility for CE marking.
description of the product (type, identification, use,…), and a copy of the information accompanying the CE marking
NOTE 2 Where some of the information required for the Declaration is already given in the CE marking information, it does not need to be repeated.
— provisions to which the product conforms (i.e. annex ZA of this EN), and a reference to the ITT report(s) and factory production control records (if appropriate),
— particular conditions applicable to the use of the product (e. g. provisions for the use under certain conditions),
— the number of the accompanying factory production control certificate, and FPC records, where applicable,
— name and address of the notified Iaboratory(ies) if some characteristics are tested by such a laboratory,
— name of, and position held by, the person empowered to sign the declaration on behalf of the manufacturer or his authorised representative.
The declaration shall be accompanied by a factory production control certificate, drawn up by the notified body, which shall contain, in addition to the information above, the following:
— name and address of the notified body,
— the number of the factory production control certificate,
— conditions of validity of the certificate, where applicable,
— name of, and position held by, the person empowered to sign the certificate.
The above mentioned declaration and certificate shall be presented, on demand, in the official language or languages of the Member State in which the product is to be used.
ZA.3 CE marking and labelling
The manufacturer or his authorised representative established within the EEA is responsible for the affixing of the CE marking. The CE marking symbol to affix shall be in accordance with Directive 93/68/EC and shall be shown on the construction product (or when not possible it may be on the accompanying label, the packaging or on the accompanying commercial documents e.g. a delivery note). The following information shall accompany the CE marking symbol:
identification number of the certification body,
— name or identifying mark and registered address of the manufacturer (see Note 1 in ZA.2.2), the last two digits of the year in which the marking is affixed,
— number of the EC Certificate of conformity of factory production control certificate (if relevant),
— reference to this European Standard;
description of the product: generic name, material, dimensions,.. .and intended use;
— information on those relevant essential characteristics listed in Table ZA.1 which are to be declared presented as:
— declared values and, where relevant, level or class (including “pass” for pass/fail requirements where necessary) to declare for each essential characteristic as indicated in “Notes” in Table ZA.1,
— “No performance determined” for characteristics where this is relevant;
as an alternative, a standard designation which shows some or all of the relevant characteristics (where the designation covers only some characteristics, it will need to be supplemented with declared values for other characteristics as above).