Standards World

ASME B30.6:2020 pdf free download – Derricks

ASME B30.6:2020 pdf free download - Derricks SECTION V: EFFECTIVE DATE (a) Effective Date. The effective date of this Volume ofthe B30 Standard shall be 1 yr after its date of issuance.Construction, installation, inspection, testing, mainte-nance, and...

02-16

ASME B20.1:2021 pdf free download – Safety Standard for Conveyors and Related Equipment

ASME B20.1:2021 pdf free download - Safety Standard for Conveyors and Related Equipment 1 SCOPE This Standard applies to the design, construction, instal-lation,maintenance,inspection,and operation of conveyors and conveying systems in relation tohazards. The conveyors may be of...

02-16

ASME B18.8.2:2020 pdf free download – Taper Pins, Dowel Pins,Straight Pins, Grooved Pins, and Spring Pins(Inch Series)

ASME B18.8.2:2020 pdf free download - Taper Pins, Dowel Pins,Straight Pins, Grooved Pins, and Spring Pins(Inch Series) 1.1 Scope 1.1.1 This Standard covers the dimensional andgeneral data for taper pins, dowel pins, straight pins.grooved pins,and spring pins.Also...

02-16

BS EN 969:2009 pdf free download – Ductile iron pipes, fittings, accessories and their joints for gas pipelines – Requirements and test methods

BS EN 969:2009 pdf free download - Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods. 6.7 Thickness of paint coatings The dry film thickness of paint coatings shall be...

02-16

ASME B18.6.2:2020 pdf free download – Square Head Set Screws and Slotted Headless Set Screws(Inch Series)

ASME B18.6.2:2020 pdf free download - Square Head Set Screws and Slotted Headless Set Screws(Inch Series) 1.1 Scope This Standard covers the complete general and dimen-sional data for square head and slotted headless setscrews. Also included is...

02-16

ASME B16.36:2020 pdf free download – Orifice Flanges

ASME B16.36:2020 pdf free download - Orifice Flanges 1 SCOPE This Standard covers pressure-temperature ratings,materials, dimensions, tolerances, testing, and making of flanges (similar to those covered in ASME B16.5)that have orifice pressure differential connections. Coverage is limited...

02-16

BS EN 957-5:2009 pdf free download – Stationary training equipment Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods

BS EN 957-5:2009 pdf free download - Stationary training equipment Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods. 6.1 General 6.1.1 Dimensional check 6.1.2 Visual examination 6.1.3...

02-16

ASME B16.21:2021 pdf free download – Nonmetallic Flat Gaskets for Pipe Flanges

ASME B16.21:2021 pdf free download - Nonmetallic Flat Gaskets for Pipe Flanges 1 sCOPE This Standard covers types, sizes, materials, dimen-sions, tolerances, and markings for nonmetallic flatgaskets.These gaskets are dimensionally suitable for use with flanges described in...

02-16

ASME B16.1:2020 pdf free download – Gray Iron Pipe Flanges and Flanged Fittings

ASME B16.1:2020 pdf free download - Gray Iron Pipe Flanges and Flanged Fittings 3.1 General Pressure-temperature ratings are maximum allowableworking pressures in bar (psi) units at the temperature indegrees Celsius (Fahrenheit> shown in Table 3.1-1 for theapplicable...

02-16

ASME 30.9:2021 pdf free download – Slings

ASME 30.9:2021 pdf free download - Slings endless sling fwire rope): a wire rope sling made endlessfrom one continuous length of cable-laid or strand-laicdrope with ends joined by one or more metallic fittings(mechanical joint)j. eye opening: the...

02-16