Standards World

ISO 8993:2010 pdf free download – Anodizing of aluminium and its alloys – Rating system for the evaluation of pitting corrosion一Chart method

ISO 8993:2010 pdf free download - Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion一Chart method. ISO 8993 specifies a chart rating system based on standard charts that provides a means...

02-10

IEC 62560:2011 pdf free download – Self-ballasted LED-lamps for general lighting services by voltage > 50 v – Safetyspecifications

IEC 62560:2011 pdf free download - Self-ballasted LED-lamps for general lighting services by voltage > 50 v - Safetyspecifications 4.2 Self-ballasted LED-lamps are non-repairable，factory-sealed units. They shall normallynot be opened for any tests. In the case of...

02-10

ISO 8820-3:2010 pdf free download – Road vehicles – – Fuse-links – Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

ISO 8820-3:2010 pdf free download - Road vehicles - - Fuse-links - Part 3: Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature). 5.3 Test cable sizes Test cable sizes...

02-10

IEC 62484:2020 pdf free download – Radiation protection instrumentation-Spectrometric radiation portal monitors(SRPMs)used for the detection and identification of illicit trafficking of radioactive material

IEC 62484:2020 pdf free download - Radiation protection instrumentation-Spectrometric radiation portal monitors(SRPMs)used for the detection and identification of illicit trafficking of radioactive material 4.1.1overview The equipment addressed by this document shall detect the presence of gamma-ray emittingsources,...

02-10

IEC 62372:2021 pdf free download – Nuclear instrumentation-Housed scintillators – Test methods of light outputand intrinsic resolution

IEC 62372:2021 pdf free download - Nuclear insFor each value of energy, the position of a maximum of a peak of full absorption is defined. The values of the nonlinearity and the initial point of assembly conversion...

02-10

ISO 08709:2010 pdf free download – Mopeds一Brakes and brake systems一 Tests and measurement methods

ISO 08709:2010 pdf free download - Mopeds一Brakes and brake systems一 Tests and measurement methods. 6.9.4 Continuous deceleration recording For the burnishing procedure and the wet brake test, there is a continuous recording of the vehicle instantaneous deceleration...

02-10

IEC 62351-6:2020 pdf free download – Power systems management and associated information exchange -Data and communication security

IEC 62351-6:2020 pdf free download - Power systems management and associated information exchange -Data and communication security 4.1 operational issues affecting choice of security options For applications using Layer 2 IEC 61850-8-1 GOOSE and Layer 2 IEC...

02-10

ISO 8638:2010 pdf free download – Cardiovascular implants and extracorporeal systems一Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters

ISO 8638:2010 pdf free download - Cardiovascular implants and extracorporeal systems一Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters. 4.4.9 Transducer protectors 4.4.9.1 Integral transducer protectors Extracorporeal blood circuits supplied with integral transducer protectors shall be capable of...

02-10

ISO 8637:2010 pdf free download – Cardiovascular implants and extracorporeal systems一 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators

ISO 8637:2010 pdf free download - Cardiovascular implants and extracorporeal systems一 Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators. 5.4 Non-pyrogenicity Compliance with 4.3 shall be verified in accordance with ISO 10993-11. 5.5 Mechanical characteristics 5.5.1 Structural integrity 5.5.1.1 General...

02-10

ISO 8332:2011 pdf free download – Rubber compounding ingredients – Sulfur – Methods of test

ISO 8332:2011 pdf free download - Rubber compounding ingredients - Sulfur - Methods of test. 5.3.2 Procedure Dry one of the sieves specified in 5.3.1.1, or a sieve with openings as agreed between the interested parties, at...

02-10