Standards World

ASTM-B545:13 pdf free download - Standard Specification for Electrodeposited Coatings of Tin. 8.2 Thickness: 8.2. 1 Standard Thickness—The coating thickness shall be measured at locations on significant surfaces by one of the following test methods: Test Methods...

ASTM-B507:14(R2021) pdf free download - Standard Practice for Design of Articles to Be Electroplated on Racks. The average-to-minimum thickness ratio in these examples was 9.2 for the part with sharp corners and 5.6 for the part with...

ASTM-B49:09(R2021) pdf free download - Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits. NOTE 1—For convenience, an ordinary hexavalent chromium electroplating solution can be used for preparing the basis metal. NOTE 2—As an alternative basis...

ASTM-B415:16(R2021) pdf free download - Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire. 7. Dimensions and Permissible Variations 7.1 The size shall he expressed by the wire diameter in decimal fractions of an inch to the nearest 0.0001...

ASTM-B406:96(R2021) pdf free download - Standard Test Method for Transverse Rupture Strength of Cemented Carbides. 4.1.3 The apparatus shall be so constructed that the application of a sufficient load to the movable member to effect breaking of...

ASTM-B350/B350M:11(R2021) pdf free download - Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application. Again, remove any such defects. Following such amplitude adjustment and inspection, recalibrate the search unit on the test block. Note the...

ASTM-B244:09(R2021) pdf free download - Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments. 8.3 Basis-Metal Thickness—For each measurement, there is a...

ASTM-B241/B241M:16 pdf free download - Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube. 18. Retest and Rejection 18.1 If any material fails to conform to all of the applicable requirements of this specification,...

ASTM-B230/B230M:07(R2021) pdf free download - Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes. 14.3 Tensile strength and elongation may be determined simultaneously. Obtain the tensile strength, in accordance with Test Methods B557 or B557M, by dividing...

ASTM-B226:11(R2021) pdf free download - Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors. 8. Physical and Electrical Tests 8.1 Tests for the electrical properties of wires composing conductors made from soft or annealed copper wire, bare or...