Standards World

ASTM-D4976:12a(R2020) pdf free download – Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

ASTM-D4976:12a(R2020) pdf free download - Standard Specification for Polyethylene Plastics Molding and Extrusion Materials. 10. Specimen Preparation 10.1 Unless otherwise specified, test specimens shall be compression molded in accordance with Annex A 1, Procedure C of Practice...

02-21

ANSI CSA NGV 5.1:2016 pdf free download – Residential fueling appliances

ANSI CSA NGV 5.1:2016 pdf free download - Residential fueling appliances 3 Definitions The following definitions shall apply in this Standard: Appliance, fueling — a self-contained assembly or facility used for compression and delivery of natural gas...

02-21

ASTM-D4807:05(R2020) pdf free download – Standard Test Method for Sediment in Crude Oil by Membrane Filtration

ASTM-D4807:05(R2020) pdf free download - Standard Test Method for Sediment in Crude Oil by Membrane Filtration. 7.2 Liboratory Sample—Use only representative samples obtained as specified in Practice D4057 (API MPMS Chapter 8.1) or Practice D4177 (API MPMS...

02-21

ANSI BHMA-A156-4:2000 pdf free download – AMERICAN NATIONA STANDARD FOR DOOR HONTROL SCLOSERS

ANSI BHMA-A156-4:2000 pdf free download - AMERICAN NATIONA STANDARD FOR DOOR HONTROL SCLOSERS 4.1.2. Mounting: Doors shall be hung on hinges, accurately aligned with vertical pins or on offset or center pivots, if required by the door...

02-21

ANSI BHMA A156:2015 pdf free download – AMERICAN NATIONAL STANDARD FOR CABINET HARDWARE

ANSI BHMA A156:2015 pdf free download - AMERICAN NATIONAL STANDARD FOR CABINET HARDWARE 4.6.2.1 Force to latch test The force required to close the door to engage the latch shall be measured at a point on the...

02-21

ASTM-D4530:15(R2020) pdf free download – Standard Test Method for Determination of Carbon Residue (Micro Method)

ASTM-D4530:15(R2020) pdf free download - Standard Test Method for Determination of Carbon Residue (Micro Method). 8.3 Final Weighing—Transfer sample vials (maintained in place in the vial holder) to desiccator and allow vials to cool to room temperature....

02-21

ANSI BHMA A156.18:2000 pdf free download – AMERICAN NATIONAL STANDARD FOR MATERIALS & FINISHES

ANSI BHMA A156.18:2000 pdf free download - AMERICAN NATIONAL STANDARD FOR MATERIALS & FINISHES 3.7 Ultraviolet Light and Condensation Test. This test shall be conducted in accordance with ASTM G 53-96 Standard Recommended Practice for Operating Light...

02-21

ASTM-D624:2020 pdf free download – Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

ASTM-D624:2020 pdf free download - Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers. 7.7.1 Tear testing is inherently a highly variable measurement since it has many characteristics similar to fatigue testing and...

02-21

ANSI BHMA A156.18:1993 pdf free download – American National Standard for materials and finishes

ANSI BHMA A156.18:1993 pdf free download - American National Standard for materials and finishes 3.2 Salt Spray Test. This test shall be conducted in accordance with ASTM B 117-90 Standard Method of Salt Spray (Fog) Testing. Parts...

02-21

ASTM-D3524:14(R2020) pdf free download – Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

ASTM-D3524:14(R2020) pdf free download - Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography. 6.2 Data Acquisition System: 6.2. 1 Integrator—Means must be provided for determining the accumulated area under the...

02-21