Standards World

ASME B18.15:2015 pdf free download – Forged Eyebolts

ASME B18.15:2015 pdf free download - Forged Eyebolts General. ASME Standards are developed and maintained with the intent to represent the consensus of concerned interests. As such, users ofthis Standard may interact with the Committee by requesting...

02-19

UL-1313:2015 pdf free download – STANDARD FOR SAFETY Nonmetallic Safety Cans for Petroleum Products

UL-1313:2015 pdf free download - STANDARD FOR SAFETY Nonmetallic Safety Cans for Petroleum Products. 9.5 The bearing pin of a valve or valve-operating part shall have a diameter of not less than 3/32 inch (2.4 mm) and...

02-19

ASME A13.1:2015 pdf free download – Scheme for the Identification of Piping Systems

ASME A13.1:2015 pdf free download - Scheme for the Identification of Piping Systems This Standard is intended to establish a common sys- tem to assist in identification of hazardous materials conveyed in piping systems and their hazards...

02-19

UL-1283:2015 pdf free download – STANDARD FOR SAFETY Electromagnetic Interference Filters

UL-1283:2015 pdf free download - STANDARD FOR SAFETY Electromagnetic Interference Filters. 10.1.7 A field-wiring terminal shall be prevented from turning by means other than friction alone. Lockwashers, properly applied, may be acceptable. 10.1 .8 A field-wiring terminal...

02-19

UL-1238:2015 pdf free download – STANDARD FOR SAFETY Control Equipment for Use with Flammable Liquid Dispensing Devices

UL-1238:2015 pdf free download - STANDARD FOR SAFETY Control Equipment for Use with Flammable Liquid Dispensing Devices. 5.2.4 A snap-on cover that gives access to exposed live parts and that does not require a tool for removal...

02-19

UL-1053:2015 pdf free download – STANDARD FOR SAFETY Ground-Fault Sensing and Relaying Equipment

UL-1053:2015 pdf free download - STANDARD FOR SAFETY Ground-Fault Sensing and Relaying Equipment. 9 Current-Carrying Parts 9.1 A current-carrying part shall have mechanical strength and current-carrying capacity for the service, and shall be of metal or other...

02-19

ASME Y14.100:2017 pdf free download – Engineering Drawing Practices

ASME Y14.100:2017 pdf free download - Engineering Drawing Practices 1.3.2 Cross-Reference of Standards. Cross-reference of standards in text with or without a date following the standard identity is interpreted as follows: (a) Reference to other ASME Y14...

02-19

UL-1047:2015 pdf free download – STANDARD FOR SAFETY Isolated Power Systems Equipment

UL-1047:2015 pdf free download - STANDARD FOR SAFETY Isolated Power Systems Equipment. b) Reliably securing such parts and insulating them from the mounting surface by means of a barrier, or the equivalent, or by means of through-air...

02-19

ASME Y14.46:2017 pdf free download – Product Definition for Additive Manufacturing

ASME Y14.46:2017 pdf free download - Product Definition for Additive Manufacturing buildsurface (ISO/ASTM52900 1 ): area where material is added, normallyon the lastdeposited layer, which becomes the foundationuponwhichthenextlayerisformed.Discussion: Forthefirstlayer,thebuildsurfaceisoftenthebuildplatform. build volume (ISO/ASTM 52900 1 ): total usable...

02-19

ASME SA370:2015 pdf free download – TEST METHODS AND DEFINITIONS FOR MECHANICAL TESTING OF STEEL PRODUCTS

ASME SA370:2015 pdf free download - TEST METHODS AND DEFINITIONS FOR MECHANICAL TESTING OF STEEL PRODUCTS 7.2 The tension testing machine shall be maintained in good operating condition, used only in the proper loading range, and calibrated...

02-19