Standards World

ASME B16.23:2016 pdf free download - Cast Copper Alloy Solder Joint Drainage Fittings: DWV 2.1 Relevant Units This Standard states values in both SI (Metric) and U.S. Customary units. These systems of units are to be regarded...

ASME B16.21:2016 pdf free download - Nonmetallic Flat Gaskets for Pipe Flanges 1 SCOPE This Standard covers types, sizes, materials, dimen- sions, tolerances, and markings for nonmetallic flat gaskets. These gaskets are dimensionally suitable for use with...

ASME B16.20:2017 pdf free download - Metallic Gaskets for Pipe Flanges GR-1 SCOPE This Standardcovers materials, dimensions, tolerances, and markings for metal ring-joint gaskets, spiral-wound metal gaskets, metal-jacketed gaskets, and grooved metal gaskets with covering layers. These...

ASME B5.50:2015 pdf free download - 7/24 Taper Tool to Spindle Connection for Automatic Tool Change This Standard pertains to the standardization of basic toolholder shank, retention knob, and socket assemblies for numerically controlled machining centers with...

ASME A90.1:2015 pdf free download - Safety Standard for Belt Manlifts 1.1 Scope This Standard applies to the manufacture, installation, maintenance, inspection, and operation of manlifts. Manlifts covered by this scope consist of steps (plat- forms) and...

ASME A17.6:2017 pdf free download - Standard for Elevator Suspension, Compensation, and Governor Systems covers the general requirements for the more common types of stranded steel wire ropes for hoisting, compensation, and governorapplications on passengeror freight elevators....

ASME A17.4:2015 pdf free download - Guide for Emergency Personnel Movement of the elevator car by any other means should be attempted only under the direct supervision of experienced elevator personnel. Before utilizing any of these procedures,...

ASME A17.3:2015 pdf free download - Safety Code for Existing Elevators and Escalators operation, preregister: operationcontrolinwhichsignals to stop are registered in advance by buttons in the car and at the landings. At the proper point in the...

ASME 17.8:2016 pdf free download - Standard for wind turbine tower elevators 1.1 Scope ASME A17.8/CSA B44.8 applies to elevators permanently installed in a wind turbine tower to provide vertical transportation of authorized personnel and their tools...

ASME B16.29:2017 pdf free download - Wrought Copper and Wrought Copper Alloy Solder-Joint Drainage Fittings - DWV 1 SCOPE This Standard for wrought copper and wrought copper alloy solder-joint drainage fttings, designed for use with copper drainage...