ANSI SCTE 215-1:2018 pdf free download – HEVC Video Constraints for Cable Television Part 1- Coding
1.0 SCOPE
This document defines the coding constraints on ITU-T Rec. H.265 ISO/IEC 23008-2 [5] video compression (hereafter called “HEVC”) for Cable Television. In particular, this document describes the coding of a single HEVC coded video elementary stream carried in MPEG-2 transport (ISO/IEC 13818-1) [4] for linear delivery systems supporting ad insertion services [3]. Beyond linear delivery with DPI, signaling is provided for segmentation of content for xDVR applications.
1.1 Background (Informative)
This document specifies the creation of an HEVC coded video elementary stream and is intended for cable video services applications such as broadcast, time-shifting (e.g., PVR/DVR service), Video-on-Demand services, and splicing (e.g., Ad-insertion) that could employ the specifications in this document. However, constraints specific to those applications are outside of the scope of this document at this time.
2.0 NORMATIVE REFERENCES
The following documents contain provisions, which, through reference in this text, constitute provisions of this document. At the time of Subcommittee approval, the editions indicated were valid. All documents are subject to revision; and while parties to any agreement based on this document are encouraged to investigate the possibility of applying the most recent editions of the documents listed below, they are reminded that newer editions of those documents might not be compatible with the referenced version.
3.0 INFORMATIVE REFERENCES
The following documents may provide valuable information to the reader but are not required when complying with this standard.
3.1 SCTE References
[13] ANSI/SCTE 215-2, HEVC Video Constraints for Cable Television Part 2- Transport.
[14] ANSI/SCTE 43, Digital Video Systems Characteristics Standard for Cable Television.
[15] ANSI/SCTE 07, Digital Transmission Standard for Cable Television.
[16] ANSI/SCTE 172, Constraints on AVC and HEVC Structured Video Coding for Digital Program Insertion.
[17] ANSI/SCTE 128-2, AVC Transport Constraints for Cable Television Part 2: Transport
[18] ANSI/SCTE 54, Digital Video Service Multiplex and Transport System Standard for Cable Television.
[19] ANSI/SCTE 187-2, Stereoscopic 3D PSI Signaling.
[20] ANSI/SCTE 67, Recommended Practice for SCTE 35 Digital Program Insertion Cueing Message for Cable
3.2 Standards from other Organizations
[21] ETSI TS 101 154 V2.4.1 Digital Video Broadcasting (DVB): Specification for the use of Video and Audio Coding in Broadcasting Applications based on the MPEG-2 Transport Stream.
[22] SMPTE ST 170, Television – Composite Analog Video Signal – NTSC for Studio Applications.
[23] SMPTE ST 274, Standard for television, 1920 x 1080 Scanning and Interface.
[24] SMPTE ST 296, Standard for television, 1280 x 720 Scanning, Analog and Digital Representation, and Analog Interface.
[25] ITU-R BT.601-6, Encoding parameters of digital television for studios.
[26] ITU-R BT.709-6, Parameter values for the HDTV standards for production and international programme exchange.
[27] ITU-R BT.2020-2, Parameter values for ultra-high definition television systems for production and international programme exchange.
[28] ITU-T J.83 Digital Video Transmission Standard for Cable Television.
[29] CEA-CEB16: Active Format Description (AFD) & Bar Data Recommended Practice.
[30] SMPTE ST 125, Standard for television, Component Video Signal 4:2:2, Bit Parallel Digital Interface.
[31] SMPTE ST 293, Standard for television, 720×483 Active Line at 59.95 Hz Progressive Scan Production,Digital Representation.
[32] SMPTE ST 267, Standard for television, Bit Parallel Digital Interface- Component Video Signal 4:2:2 16×9 Aspect Ratios.