ASME B5.35:1983 (2018) pdf free download – Machine Mounting Specifications for A,brasive Discs and Plate Mounted Wheels
1 PURPOSE
To provide standards to be used in the design of machine face plates matching the location of nuts, washers, studs of abrasive discs, or plain or tapped holes of plate mounted wheels.
2 SCOPE
This Standard covers ANSI Standard practice for location and size of bolt holes for mounting abrasive discs and plate mounted wheels.
3 GENERAL
3.1 Abrasive discs are bonded abrasives which are molded with inserted nuts, inserted washers, project- ing studs, or a tapped mounting plate on the mount- ing side of the abrasive disc. The nuts, washers, studs, or tapped holes are located in a pattern to match the spacing of corresponding holes in the machine face plate.
3.2 For standar diameters and minimum thick- nesses of steel disc wheels, see Table 1.
3.3 Inserted nut type discs (see Fig. 1.1) are those having threaded nuts anchored in the mounting side of the disc which are located in a pattern to match the spacing of corresponding holes in the machine face plate (see Fig. 1.2).
3.4 Inserted washer type discs (see Table 2 and Fig. 2) are those having washers anchored in the mounting side of the disc which are located in. a pattern to match the corresponding holes in the machine face plate.
3.5 Tapped mounting plate type discs (see Table 3 and Fig. 3) are those having a mounting plate ce- mented to the mounting side of the disc which has tapped holes located in a pattern to match the cor- responding holes in the machine face plate.
3.6 Projecting stud type discs (see Table 4 and Fig. 4) are those having studs enclosed in the mount- ing side of the disc which are located in a pattern to match the corresponding holes in the machine face plate.
3.7 Cylinder type discs (see Table 5 and Fig. 5) are similar in shape to Type 2 abrasive wheels. Mounting may be by means of inserted nuts, projecting studs, or tapped mounting plate. The mounting means are located in a pattern to match the corresponding holes in the machine face plate.
3.8 Plate mounted wheels (see Tables 6 and Fig. 6) are bonded abrasives having mounting plates of steel or other rigid material cemented to the mounting side of the wheel which has mounting holes located in a pattern to match corresponding holes in the machine face plate. The mounting holes are always located within the inside diameter of the abrasive section. Grinding is done on the exposed flat side.